Didn't get the code. Resend

59 Seconds

Didn't get the code. Resend

59 Seconds

Rs. 100.00

Adults

+ -

Rs. 100.00

Rs. 100.00

Child

+ -

Rs. 100.00

Amount Payable

Rs. 100.00

Rs. 100.00

Adults

1

Rs. 100.00

Rs. 100.00

Child

1

Rs. 100.00

Amount Payable

Rs. 100.00

Default Logo

Air Control Holdings Pvt Ltd

Roof Fans

RACF series of roof fans can continuously operate more than 0.5 hours in the gas fume with temperature up to 280℃. The fans are popularly used for roof ventilation or fire-fighting smoke evacuation in factory buildings.

Stall:
Axial Fans

Axial fan can continuously more than 0.5hours in 280°C gas fume. The series of fans have been tested by the ”National Fire Equipment Quality Supervision and Test Centre”. Mainly used in ventilation and fire-fighting smoke evacuation in engineering. Working Temperature: Work continuously more than 0.5hours in 280°C gas fume. Applications: Mainly used for ventilation and fire fighting exhaust systems at special places of engineering buildings. (Such as explosion-proof or anti-corrosion environment)

Stall:
Box-type Fan

The BKB series duct fan is build-in double inlet forward curve centrifugal fans. Than fan is driven by LKB series external rotor motor. The BKB series includes 9 models. The air volume and total pressure range from 1000m³/h to 20000m³/h and 200Pa to 600Pa. Customers can request a different site on the noise, can be used with BKBS-type silencer box to meet the requirements of low noise. Pipe fan of series special motors can be configured through the three-phase voltage regulator, SCR voltage regulator, inverter and other means of speed, changing to meet system load requirements. Impeller Diameter:200-500mm Air volume Range:500-20000 m³/h Total pressure Range: up to 600 Pa Drive Type: Direct Drive Model: 200,225,250,280,315,355,400,450,500 Installation Type: Seat installation, hoisting installation Applications: Mute ventilation, purification ventilation.

Stall:
Turbine Ventilators

Turbine Ventilators are always spinning and ventilating. Non- stop ventilation is possible due to the integrated bearing housing, which ensures ventilator rotation at even wind speed of less than 1 km per hour. High quality steel ball bearings, enclosed in a 5-layer integrated housing allow safe operations in smoky, sooty, dusty, oily environments

Stall:
EAC Units

Evaporative coolers, also called swamp coolers, rely on this principle. By passing outdoor air over water-saturated pads, the water in the pads evaporate, reducing the air temperature by 15°- to 40°F-before it is directed into the home. Evaporative coolers cost about one-half as much to install as central air conditioners and use about one-quarter as much energy. However, they require more frequent maintenance than refrigerated air conditioners and they're only suitable for areas with low humidity.

Stall:
Grill Diffucer

4 – way adjustable perforated ceiling diffuser deflects air equally on all four directions. It has the advantages of controlling the air flow direction by adjusting the individual blades. They are also available with individually adjustable curved blades with the option of 1-way, 2-way and 3-way throw air patterns.

Stall:
Silicone

SV 101 waterproof acrylic sealant is a one-component environmental friendly sealant.It has good waterproof ability,weatherproof ability and multipurpose use.It has good flexibility,adhesion and paintable.

Stall:
AHU Units

The air handling unit (AHU) is the heart of central air conditioning. It collects outside air and room air, removes dust and other particles from the collected air, adjusts the temperature and humidity and then supplies comfortable and refreshing air-conditioned air into the rooms through ducts.

Stall:
Flexible Duct

Flexible ducts generally attach air outlets to rigid ductworks. The round ducts are composed of ISOVER glass wool sandwiched between layers of robust plastic or aluminium, with coil wires for rigidity. They are primarily used for attaching supply air outlets (diffusers and grids) to the rigid ductwork.

Stall:
cu pipe & insulations

Usually in refrigeration and air conditioning driving networks of refrigerant gas are constituted by piping performed with copper pipe and tubes. Copper is one of the most resistant metals and appropriate for the transport of fluids and have the great advantage of having surfaces, both the outside with the inside, fairly regular, smooth, dry and clean.

Stall:
Water Cool Package Unit

The water-cooled packaged unit has single or multiple hermetic compressors with independent refrigerant circuits. Each refrigerant circuit consists of a high efficiency condenser, a sealed strainer and capillary tubes.

Stall:
Some text some message..